Trusted spray foam roofing & insulation services for Ward, AR property owners. Licensed, insured, and backed by manufacturer warranties.
Professional roofing, coating, and insulation services for Ward property owners and facility managers.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
When severe weather damages your roof, our storm response crews deploy fast — securing your property, documenting every impact point for your insurance claim, and restoring your roof with quality materials and expert workmanship.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Stop metal roof leaks without replacement. Our elastomeric coating system treats rust, seals every fastener and seam, and creates a continuous waterproof membrane over your entire metal roof — backed by a manufacturer warranty.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.
Transform your building with a spray foam roof that insulates, waterproofs, and strengthens in a single application. No tear-off required over most existing substrates. Backed by manufacturer warranties and our own workmanship guarantee.
Spray foam insulation for crawl space walls, rim joists, and band boards that eliminates moisture, cold floors, and musty odors. Closed-cell foam acts as both insulation and vapor barrier in a single application.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Energy costs hit smaller communities like Ward, AR just as hard as big cities — sometimes harder. Lapolla Industries specializes in spray polyurethane foam solutions that deliver R-6.5 per inch of insulation value, the highest of any roofing or insulation material available. For Ward property owners, that translates to immediate, measurable savings on heating and cooling.
Our spray foam systems create a seamless thermal envelope that eliminates air infiltration — the single biggest source of energy waste in buildings. Whether we are insulating your Ward attic, sealing your crawl space, or installing a new SPF roof, the science is the same: eliminate gaps, stop air movement, and let your HVAC system work the way it was designed to.
Quality, integrity, and results — the Lapolla Industries difference for Ward property owners.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
Common questions about spray foam roofing and insulation in Ward, AR.
A properly installed SPF roof in Ward can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Yes. Every project in Ward begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
Spray foam is one of the best solutions for flat and low-slope roofs in Ward. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Ward crews evaluate the existing substrate to ensure it is structurally sound before application.
Yes. Every Ward crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Ward. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Ward roof with drainage challenges or heavy weather exposure.
Honest feedback from property owners who trusted Lapolla Industries with their spray foam projects.
"Our metal warehouse roof had been leaking at the ridge and sidewall transitions for years. The coating crew sealed every penetration, fastener, and seam. Completely watertight now and the energy savings are a great bonus."
"Attic insulation upgrade from blown-in to spray foam. The crew masked everything off properly and the overspray was minimal. The temperature in our attic dropped dramatically and so did our energy bills. Worth the investment."
"Lapolla Industries installed a spray foam roof on our warehouse last spring. Their crew was thorough, professional, and finished ahead of schedule. The building stays cooler in summer and the roof looks pristine a year later."
We also provide spray foam roofing and insulation services in these neighboring communities.